performance

1. This machine combines film coating technology, transfer pressing technology and organically integrates it with UV curing equipment.
2. This equipment mainly consists of the following systems: transfer film unwinding, transfer film surface gluing, film gluing surface heating, film and panel combination pressing, panel surface pattern curing and film peeling and rewinding.
3. Conveying method: chain plate conveying, rubber roller pressing to ensure that the pattern of the pressing surface is not deformed.
4. The UV transfer film unwinding tension controller is a product imported from France. It has sensitive tension detection and rapid feedback to adjust the film tension in a timely manner to ensure uniform coating of the film. The flattening roller uses a rubber curved roller to eliminate film wrinkles before transfer. Make sure the film and board are completely attached.
5. The UV curing part uses a curing solution that combines gallium lamps, iron lamps, and mercury lamps to ensure that UV patterns of different colors can achieve the best curing effect during curing.
6. In the event of an emergency, the UV lampshade will automatically flip upwards 180 degrees, reducing the energy by 50%. After 3 to 5 minutes, if the fault is not resolved, the UV lamp will automatically turn off to ensure that the product and lampshade are not damaged.
7. The film peeling system adopts a continuous film peeling and rewinding method and uses electromagnetic tension control.